Type SC – Servo worm gearboxes

Type SC – Servo worm gearboxes
FEATURES
Gear ratios: i = 10:1 up to 20:1 (i>20 upon request)
Maximum acceleration torques on output: 1100 Nm
5 gearbox sizes ; centre-to-centre distance: 040 to 100 mm
Minimised circumferential backlash (optional)
Housing made of grey cast iron
Worm gearboxes suitable for fitting servo-motors
Non-positive connection between motor and gearbox

CONSTRUCTION TYPES

GEARBOX SIDES

ORDER CODE

Type Size Gear ratio Model Fixing side Installation position Speed n2 Design
SC 050 5:1 B0- 1. 1- 600 /0000
Description Size; Table 11.5.15‑1 Table 11.5.15‑1 Figure 11.5.15‑1 Side on which fixing is made; Table 11.5.4‑1 Side directed downwards; Figure 4.3.1-1

Gearbox sides

 Slowly rotating shaft

Table 11.5.15‑1

 Will be determined by ATEK
V080- / 14 x 30 No. 301 KN
Flange Motor shaft Ø x length Flange no. See chapter “Coupling”

 

TYPE OVERVIEW